LCD Display + Touch Screen Digitizer Assembly Replacement for iPhone 6S(White)

Product Description

 

LCD Display + Touch Screen Digitizer Assembly Replacement for iPhone 6S(White)

About the product
1. Replacement LCD Screen for iPhone 6S 
2. Replace the old, broken, cracked, damaged one 
3. Make your device look more refreshing than ever 
4. Completely fit and work 
5. Each item has been checked and in good condition before shipping 
6. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts

Before Installation Notes
1. Tips 1: Test before installation 
When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. 
Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. 
Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 
2. Tips 2: Simulates testing 
Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible if the mobile phone is damaged during installation. 
3. Tips 3: Do not over-bend cable 
Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

Specification:
General
Compatible with
Apple:  iPhone 6S
Types LCD Screen + Touch Screen Digitizer Assembly
LCD is Bubble Bag Protected, we will not offer warranty for installation.
More Pictures:

How to install/Tips:

How to install/Tips:

1. Power off the iPhone 6S and remove the SIM card tray with en eject pin tool.

2. Undo the 2 charging port screws with a Pentalobe screwdriver

3. Pop up the LCD assembly by lifting up a gap with a suction cup tool and insert the case opening tool in between, running around the edges to release the LCD assembly

4. Undo the 4 screws to release the metal protection cover and then gently lift up the flex ribbon connectors to release the whole iPhone 6S LCD assembly. Be careful, there´s adhesive underneath.

5. Undo the 3 screws to release the metal bracket covering the earpiece.

6. Remove the earpiece and front camera with sensor

7. Undo the 8 screws and pry up the adhesives to release the metal LCD back plate

8. Undo the 2 screws, then pry up the metal bracket, the home button flex connector and adhesive to release the home button assembly